Page 1 of 3 123 LastLast
Results 1 to 10 of 25

Thread: [RELEASE]RGLoader 0v290 [RGH2 + JTAG Xell Beta Release]

  1. #1
    Join Date
    May 2011
    Posts
    17
    Rep Power
    17

    Default [RELEASE]RGLoader 0v290 [RGH2 + JTAG Xell Beta Release]

    ___/ - RESET GLITCH LOADER-dev 0v290 - \___
    ________ #RGLoader @ EFnet ________

    ***THIS IS A BETA RELEASE, NOT EVEN THE NFO IS FINISHED YET***


    ===================Flexible Systemroot Patches=========================
    (hard drive free installs!)

    We have added a new feature to replace the E90 error that gets thrown when the hard drive is missing or files have been misnamed.
    If any errors occur during its attempt to remap systemroot to the hard drive (wrong folder name, hdd unplugged, etc..) it will boot into
    minimal NAND only mode where the devkit launcher dashboard will still boot.

    This means that a hard drive is not neccesary to run RGLoader! This also means that you can just flash the image on and use minimal mode to copy
    and setup the hard drive files for the full installation using xbox neighborhood.

    It is not recommended to use the minimal mode, but it does work.
    ================================================================


    =============JTAG BETA RELEASE - All but big block jasper ====================
    We are now beta testing xenon and hdmi jtags!

    When building a jtag image, it is best to supply an already jtagged NAND. This way any customizations
    to your SMC will be kept and also if your crc does not match it will not matter. (this will not be neccesary in final release)
    NOTE: When an already patched SMC is supplied, the builder will say (unable to patch). Just ignore this.

    XELL HAS BEEN ADDED TO JTAG IMAGES!
    ================================================================

    =====================DUMMY KV Generation===========================
    To protect you from getting your keyvaults banned, we have added an option to options.ini for creating a
    temporary dummy KV. This sometimes introduces a lag when going to the dashboard and some xex caused by the
    xbox live connection timeout. If this annoys you, just disable it in options.ini and we will get it fixed soon.
    ================================================================


    RGH2 Support has been added! Big thanks to Team-Xecuter for their research and work.

    Dynamic patches have been added! Use options.ini to configure extra patches like NOFCRT or NOMU.

    Big thanks to team-xecuter & xconsoles for donating a xenon jtag! Would not have been possible without this.

    This builder still does not support big block jaspers. I know this sucks for a lot of jtags, so we will try to get this out ASAP.


    ---Things to come in final release---
    Big block support.
    hvxbootOS
    much more...


    \_____________________|- Usage -|________________________/

    AS OF 0v99 YOU NEED TO PROVIDE THE FILESYSTEM FILES --

    Download a filesystem package and extract it into the same folder as this builder (merging filesystems and loaders)

    Slims require fcrt.bin to play retail DVDs.
    -----------------------------------------------------

    You will need .NET Framework 4 installed. May work with Mono.

    Create a folder 'Filesystems' (don't forget the 's') on the xbox hard drive.
    (This is where you will store the devkit system files since they won't all fit on a 16MB retail NAND.)

    Copy the devkit files to a folder '14699-dev' (or 14719-dev for ver.14719) inside of 'Filesystems' on the HDD.
    ie: hdd:/Filesystems/14699-dev

    Put your nand next to the builder and name it "nand.bin".

    Open the RGBuild Launcher and type in your CPU_Key and select your build options.

    Click "RGBuilder" button to start the process.

    Output will be next to this file named: Image._____.bin


    ----------- Prototype NAND Image Editor -----------
    Click "Image Editor" button in the launcher, or run rgbuild.exe /ui to open the rgbuild UI, which is a prototype NAND image editor similar to 360 flash tool. The GUI is still in beta, but should be very functional. Please reports bugs to #rgloader!



    \_____________________|- Known Bugs -|________________________/

    -Occasionally slims/trinitys will freeze or reboot on the first boot attempt after a reflash.
    This usually only happens the first time, if ever.

    -Dummy KV sometimes introduces lags when opening xexes.

    -Slims require fcrt for retail dvds to run.



    \_____________________|- Changelog -|_________________________/

    0v290
    -Fixed RGH2
    -Added flexible systemroot patches! (no hdd needed!)
    -Added xell to jtag images
    -Fixed ini problems
    -Slightly faster phat boot times

    0v280
    -Fixed slim CBB pairing data issue
    -Added dynamic patches, check out options.ini [Patches]
    -Prettied up patch code (thanks for macros.S cOz!)
    -New GUI Update via m0j0j0_j0
    -Systemroot patches are now optional (dynamic)
    -Added custom error code e90! (hdd filesystem failure)
    -Fixed HDMI jtags
    -Added RGH2 support! (thanks Team Xecuter)

    0v260
    -Added better error handling on patch compiling
    -MUCH faster compile times
    -Added GUI launcher (thanks m0j0j0_j0!)
    -GUI Launcher settings save to options.ini
    -Xenon jtag 14719 fixed

    0v255
    -Fixed 14719 dash issue
    -Fixed 14719 retail xex issue
    -Fixed KV editing in GUI
    -Added dummy KV generating (thanks cOz!)
    -Added option to generate KV in options.ini
    -Patched xbdm to always be dev, instead of xbdm.ini (thanks Natelx!)

    0v240
    -Integrated bat files into rgbuild.exe
    -Fixed jasper issue
    -Added options.ini
    -Lots of changes to builder, mostly internal
    -Missing filesystem files will now be ignored (dae, fcrt, etc..)
    -Changed selection menu
    -Auto detects console using smc (thanks cOz!)
    -Fixed CF/CG bug (can now use them in GUI)
    -Support for JTAG images
    -Changed selection menu layout
    -Builder now ignores missing filesystem files instead of locking up
    -Added 14719
    -Support for trinity 14719 source images
    -Updated xell binary to v0.991
    -Added icons to builder (thanks m0j0j0_j0!)
    -Fixed xell binary size issue
    -Added option for compiling phat CD to options.ini
    -Fixed issue with KV editing not saving

    0v170
    -Added KV editing to the GUI
    -Xell dual boot (xell-gggggg.bin)
    -Bad block support
    -Added font files to nand image to fix fsd (thanks cOz)
    -No need to run image through nandpro anymore
    -More error handling, builder doesn't say successful build every time

    0v100
    -Added 14699 patches
    -Moved files location on hdd
    -Slims show up as dev kit on 14699 without xbdm.ini or modded xbdm.xex
    -Retail disc support on slims
    -Added neededfiles.txt to the folders


    \_____________________|- GREETINGS -|_________________________/

    RGLoader was started from the foundations left by others.
    We hold no claim to researching everything used in rgloader.
    It's thanks to the work of the amazing people below that we got anywhere:

    tmbinc, almost every 360 tool owes you for your initial work. although
    we may be -FAR- away from your intended goals, we'd still like to thank
    you for your amazing work and the example you set for a good reverse engineerer.

    The 360 Flash Tool team, thanks for your amazing tool which has
    helped many people, many times over. My only gripe is that it's
    not open, maybe one day.

    GliGli, Tiros, and co., I'm sure anybody with a glitched console should
    know the work you all put in. I hope recent releases won't deter you
    from continuing to contribute to the scene with your work.

    Last but not least: the donators who helped get me a glitched box
    and CPLD, I will add the names to the nfo in the final release.

    jsjar for graphics and dash skin.

    m0j0j0_j0 for RGLauncher skin and icons.

    Big thanks to cOz for tips and hints and for the work he has contributed
    to the scene.

    Thanks to Tortuga Cove for providing news updates and hosting services.

    GliGli, Tiros, cOz, and co.
    IceKiller
    Team-Xecuter
    TeamFSD
    Freeboot/ggbuild/xebuild team
    Natelx

    ----------------------------------------------------
    #RGLoader-dev Group

    tydye81
    stoker25

    Deathlok
    RF1911
    spandaman
    Juggahax0r
    Evil0ne
    XDK
    Mustache
    iCEQB
    m0j0j0_j0

    ----------------------------------------------------
    Testers/Helpers/#RGLoader regulars

    Ameel
    Grim187
    Rumblpak
    iLLNESS
    Xumpy
    Gadorach
    no1b4me
    Mycah
    Alter
    PizzaG
    ddxcb
    _nitram

    (many more to add)


    RGBuild Beta 0v290
    14719 Filesystem Package
    Posts merged - please don't double post!
    Fixed formatting.

  2. #2
    Join Date
    Aug 2011
    Location
    Italy
    Posts
    111
    Rep Power
    39

    Default Re: [RELEASE]RGLoader 0v290 [RGH2 + JTAG Xell Beta Release]

    Thanx Mojojo!!! You rock as always my friend +REP for you!!! i love this work!!

  3. #3
    Join Date
    May 2011
    Posts
    17
    Rep Power
    17

    Default Re: [RELEASE]RGLoader 0v290 [RGH2 + JTAG Xell Beta Release]

    Hey Vamp lol.

  4. #4
    Join Date
    May 2010
    Posts
    257
    Rep Power
    20

    Default Re: [RELEASE]RGLoader 0v290 [RGH2 + JTAG Xell Beta Release]

    Thanks very much! +rep

  5. #5
    Join Date
    Aug 2011
    Location
    Italy
    Posts
    111
    Rep Power
    39

    Default Re: [RELEASE]RGLoader 0v290 [RGH2 + JTAG Xell Beta Release]

    Dante does the exe crash for you on win7 just to know?

  6. #6
    Join Date
    May 2010
    Posts
    129
    Rep Power
    20

    Default Re: [RELEASE]RGLoader 0v290 [RGH2 + JTAG Xell Beta Release]

    Mirror RGBuild Beta 0v290 +14719 Filesystem Package: http://www.mediafire.com/?8azgot1j8ezwcmp

  7. #7
    Join Date
    May 2011
    Posts
    17
    Rep Power
    17

    Default Re: [RELEASE]RGLoader 0v290 [RGH2 + JTAG Xell Beta Release]

    Expect a quick release today with a bunch more improvements that we developed in the past 24 hours. Expect great things that even fusi0n doesn't have.

  8. #8
    Join Date
    May 2010
    Posts
    257
    Rep Power
    20

    Default Re: [RELEASE]RGLoader 0v290 [RGH2 + JTAG Xell Beta Release]

    Quote Originally Posted by m0j0j0_j0 View Post
    Expect a quick release today with a bunch more improvements that we developed in the past 24 hours. Expect great things that even fusi0n doesn't have.
    Great. Looking forward to that. (actual version crashes on win7)

  9. #9
    Join Date
    Aug 2011
    Location
    Italy
    Posts
    111
    Rep Power
    39

    Default Re: [RELEASE]RGLoader 0v290 [RGH2 + JTAG Xell Beta Release]

    Great Mojo i love u guys u are doung something marvelous day by day!! Thanx for awesome job

  10. #10
    Join Date
    Dec 2010
    Location
    The Skull & Crossbones Pub. Hell Radio HQ \\m//
    Posts
    665
    Rep Power
    218

    Default Re: [RELEASE]RGLoader 0v290 [RGH2 + JTAG Xell Beta Release]

    Thanks this is better than fusion good work mate rep to you!

    For some reason this one crashers when building nand on windows 7. (Still better than fusion) ;)
    Mozzy616-Hell-Radio-The-Music-Is-Hot-Down-here!
    http://myradiostream.com/mozzyhellradio

Page 1 of 3 123 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Please contact us for your DMCA OR Abuse Requests via
dmca@xbox360iso.com
Xbox360ISO website is not endorsed by or affiliated with Xbox and/or Microsoft Corporation.
eXTReMe Tracker