Page 1 of 76 1231151 ... LastLast
Results 1 to 10 of 752

Thread: [TUTORIAL] Fastest Way to Get Xbox1 Working on JTAG - REPOST w/ WORKING LINKS

  1. #1
    Join Date
    Nov 2010
    Location
    Krypton
    Posts
    9,686
    Rep Power
    611

    Default [TUTORIAL] Fastest Way to Get Xbox1 Working on JTAG - REPOST w/ WORKING LINKS

    I don't take credit for these instructions, this is just a repost of srod's guide. Since the links are all down, I reposted the information with new links. Credit goes to srod for the guide. I'll take credit for links. Enjoy!

    UNDERSTAND THAT YOU NEED TO HAVE AN INTERNAL HARDDRIVE FOR THIS TO WORK. DO NOT ATTEMPT TO INSTALL THE FILES ON AN EXTERNAL DRIVE, FLASHDRIVE, ONBOARD MEMORY UNIT, ETC. IT WILL NOT WORK UNLESS YOU USE AN INTERNAL HARDDRIVE. THE HDDX PARTITION ONLY EXISTS ON THE INTERNAL, NOWHERE ELSE.

    NOTE: A lot of new members have had issues with locating the HDDX partition on their consoles using File Manager within FSD. It is recommended that Xexmenu be used in lieu of File Manager for a couple of reasons:
    1. File Manager will not show the HDDX partition unless you manually override the settings within FSD (General Settings) to show HDDX as a valid partition within File Manager.
    2. FSD's File Manager is quirky at times and does not overwrite files as needed within the referenced tutorial.

    Do yourself the favor and use Xexmenu to follow the below instructions. If you are using FSD's File Manager and PM me stating that HDDX does not exist on your console or that the Compatibility folder shows a directory labeled Xbox1, it will go unanswered. Follow the directions please, and you shall have no issues whatsoever.

    If you want to get Xbox1 games working within 15 minutes on your JTAG/RGH just read carefully and follow the directions. You'll need a USB flashdrive and Xexmenu installed/running.

    1. Download "XB1 HDD Compatibility Fixxer" (this will create/format Hddx on your JTAG/RGH). After extracting, run .xex via Xexmenu
    - http://netload.in/dateiVmjMP3Bjds/XB...Fixxer.rar.htm

    2. Download the Original Backwards-Compatibility Files:
    - http://netload.in/dateip44aqL1VNC/Or...yFiles.rar.htm

    3. After downloading and extracting both files, there should be two folders labeled "Partition 2" and "Partition 3." First transfer both of the folders inside Partition 2 (compatibility and tdbx) to Hddx. Overwrite any preexisting folders. Once that has been completed, take the folder inside partition 3 ($TitleUpdate) and copy it to the root of Hdd1.

    4. Last step is to download hacked compatibility (latest ones as of July 2011):
    - http://netload.in/dateiX6uXFzUx8i/xb...hacked.rar.htm

    *NOTE: If you are running into issues with the hacked compatibility files from 2011 not working for you, try using these from the original files back in 2007. They may work, and have worked for some members when the 2011 ones were not: http://netload.in/datei8JO3hivaf5/xb...hacked.rar.htm

    5. After downloading and extracting, there will be a folder labeled "Compatibility". Take that folder and place it in Hddx. It will ask if you want to OVERWRITE, say YES.

    6. If XBox1 games do not get past the white XBox logo screen, update to latest dash launch. With hacked compatibility a majority of games run successfully. However, there are a few that don't.

    7. Also there are various ways you can put XBox1 games on JTAG/RGH. The choice is yours: Freestyle, Games on Demand, or run from disc.

    BTW - Use "COPY LINK LOCATION" in Firefox when downloading links.



    IF BY ANY CHANCE THE LINKS GO DOWN, SEND ME A PM AND I WILL RELOAD IMMEDIATELY. I AM STAYING ON TOP OF IT TO ENSURE THAT THEY REMAIN ACTIVE, BUT THINGS HAPPEN.

  2. #2
    Join Date
    May 2010
    Posts
    115
    Rep Power
    20

    Default Re: Fastest Way to Get Xbox1 Working on JTAG - REPOST w/ WORKING LINKS

    Thanks man, just what I needed! +rep

  3. #3
    Join Date
    Nov 2010
    Location
    Krypton
    Posts
    9,686
    Rep Power
    611

    Default Re: Fastest Way to Get Xbox1 Working on JTAG - REPOST w/ WORKING LINKS

    Quote Originally Posted by eurbert View Post
    Thanks man, just what I needed! +rep
    You're welcome.

  4. #4
    Join Date
    Jan 2012
    Posts
    3
    Rep Power
    15

    Question Re: Fastest Way to Get Xbox1 Working on JTAG - REPOST w/ WORKING LINKS

    Thanks for the TUT.
    Wanted to make sure: does the partition fixer cause any damage to the already existing partition on HDD? (HDD1), or it just creates the new partitions without interuppting the existing ones?

  5. #5
    Join Date
    Oct 2011
    Posts
    3
    Rep Power
    15

    Default Re: Fastest Way to Get Xbox1 Working on JTAG - REPOST w/ WORKING LINKS

    Thanks man

  6. #6
    Join Date
    Mar 2010
    Posts
    5
    Rep Power
    18

    Default Re: Fastest Way to Get Xbox1 Working on JTAG - REPOST w/ WORKING LINKS

    dude wer do u put the iso?? do i need an emulator for this to work? thanks
    Posts merged - please don't double post!
    sorry iam a noob,, figured it out, hhhh

  7. #7
    Join Date
    Nov 2011
    Posts
    76
    Rep Power
    15

    Default Re: Fastest Way to Get Xbox1 Working on JTAG - REPOST w/ WORKING LINKS

    awesome. Thanks.

  8. #8
    Join Date
    Nov 2010
    Location
    Krypton
    Posts
    9,686
    Rep Power
    611

    Default Re: Fastest Way to Get Xbox1 Working on JTAG - REPOST w/ WORKING LINKS

    Quote Originally Posted by lilachk View Post
    Thanks for the TUT.
    Wanted to make sure: does the partition fixer cause any damage to the already existing partition on HDD? (HDD1), or it just creates the new partitions without interuppting the existing ones?
    This entire process will not harm or delete any existing files you have on your drive. This includes, but is not limited to, game saves, dlc, xbla, etc.

  9. #9
    Join Date
    Jan 2012
    Posts
    1
    Rep Power
    15

    Default Re: Fastest Way to Get Xbox1 Working on JTAG - REPOST w/ WORKING LINKS

    does this work on freestyle dask?

  10. #10
    Join Date
    Dec 2009
    Location
    BA, Argentina
    Posts
    39
    Rep Power
    19

    Default Re: Fastest Way to Get Xbox1 Working on JTAG - REPOST w/ WORKING LINKS

    Does it work with an external usb HDD?

Page 1 of 76 1231151 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Please contact us for your DMCA OR Abuse Requests via
dmca@xbox360iso.com
Xbox360ISO website is not endorsed by or affiliated with Xbox and/or Microsoft Corporation.
eXTReMe Tracker